Siemens Hipath 5000 - Making Calls Using System Speed-Dial Numbers; Dialing with Speed-Dial Keys

Enhanced phone functions
65
Step by Step
Making calls using system speed-dial numbers
Prerequisite: You know the system speed-dial num-
bers (consult your service personnel).
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown
[1]
.
j Enter a three-digit speed-dial number.
Pay attention to the notes on voice encryption
Æ page 113.
if nec. Suffix-dialing
j If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Dialing with speed-dial keys
Prerequisite: You have configured speed-dial keys
Æ page 65.
v Open the Program/Service menu Æ page 42.
Select and confirm the option shown
[1]
.
* Press the key shown.
j Press the required speed-dial key.
Pay attention to the notes on voice encryption
Æ page 113.
Configure a speed-dial key
You can program the keys
0 to 9 with
ten frequently used phone numbers.
v Open the Program/Service menu Æ page 42.
Confirm.
Select and confirm the option shown
[1]
.
* Press the key shown.
Use speed dialing
[1] "Differing display view in a HiPath 4000 environment" Æ page 196
Use speed dialing
Destinations g
Change Speed Dial