Siemens MCP 398C Programming Manual

Master/slave coupling
Identifier Parameter Explanation
1. - n.
MASLON AXIS:
Axis identifier
Switch on master/slave coupling
MASLOF AXIS:
Axis identifier
Separate master/slave coupling
MASLOFS AXIS:
Axis identifier
Separate master/slave coupling and automatically brake slave spin‐
dles
MASLDEF AXIS:
Axis identifier
Define master/slave coupling
The last axis is the master axis
MASLDEL AXIS:
Axis identifier
Separate master/slave coupling and delete the definition of the group‐
ing
Online tool length offset
Identifier Parameter Explanation
1. 2.
TOFFON AXIS:
Offset direc‐
tion
REAL:
Offset value
in offset direc‐
tion
Activate online tool length offset in the specified offset direction
TOFFOF AXIS:
Offset direc‐
tion
Reset online tool length offset in the specified offset direction
SERUPRO
Identifier Parameter Explanation
IPTRLOCK Start of untraceable program section
IPTRUNLOCK End of search-suppressed program section
Retraction
Identifier Parameter Explanation
1. - n.
POLFMASK AXIS:
Geometry or machine axis name
Enable axes for rapid retraction
(without a connection between the
axes)
POLFMLIN AXIS:
Geometry or machine axis name
Enable axes for linear rapid retrac‐
tion
Tables
4.4 Predefined procedures
NC programming
1286 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English