MAC addresses
A nameplate for the MAC addresses of the PROFINET and Ethernet interfaces is attached to the
front panel of the NCU:
① Component name
② Hardware revision level
③ Article number
④ Product code
⑤ Serial number
⑥ MAC addresses
Figure 3-3 MAC addresses of the PROFINET/Ethernet interfaces
You can see this nameplate when you open the front cover of the NCU.
Note
Scanning the product code
The product code contains the article number of the device. Scan the product code with the
Siemens Industry Online Support App to be taken directly to the Internet webpage for the
product, including all the technical information and graphical data.
The app is available for iPhone, iPad, Android and Windows Phone.
Note
The contents of the individual nameplate elds on the actual NCU may dier from those
described in this Manual (e.g. updated product status, approvals and identications not yet
issued, etc.).
Information about third-party software used
This product contains open source software ("OSS") components that are subject to the GPL/
LGPL licenses and other OSS licenses. The associated OSS component and license information as
well as information about the OSS source code (together: "OSS Information") are stored on the
product and can be retrieved as follows:
Description
3.3 Type plates
NCU 7x0.3B PN
26 Equipment Manual, 10/2020, 6FC5397-1EP40-6BA1
To Next Page
Loading...
Need help?
General
