Siemens MICROMASTER 430 User Manual

Issue 01/05 Diagnostics and troubleshooting
CANopen Option Module Operating Instructions
6SE6400-5BC00-0BP0
121
7.4 Software release and information
The software release and other software information on the communications
module are displayed in the indexed parameter r2053.
Parameter Description
r2053.00 Module type (3 = CANopen)
r2053.01 Version (11 = Version 1.1); this is the same version which is output at CANopen
r2053.02 Firmware details
r2053.03 Year of the software
r2053.04 Day / month (2404 = 24
.
April) of the software

Siemens MICROMASTER 430 Specifications

General

Power Range	7.5 kW to 250 kW
Voltage Range	380V to 480V
Frequency Range	0 Hz to 650 Hz
Protection Class	IP20
Input Frequency	47 Hz to 63 Hz
Digital Inputs	6
Cooling Method	Forced-air cooling
Communication	USS
Protection Features	Overvoltage, undervoltage, overcurrent, short-circuit, ground fault, overtemperature
Analog Inputs	2
Digital Outputs	3
Analog Outputs	2
Ambient Temperature	-10°C to +50°C
Control Type	Sensorless vector control