Siemens MICROMASTER 430 User Manual

Data transfer using CANopen Issue 01/05
CANopen Option Module Operating Instructions
54 6SE6400-5BC00-0BP0
Error
Code
(Bytes 1/2)
(Hex)
Meaning
Fault
number
(Bytes 3/4)
Dec/Hex
Sub Fault
number
(Bytes
5/6)
Description
7332 FAN failure F0030/0029H 0000 FAN failure
7510 Communication/serial
interface No. 1
F0071/0047H 0000 USS/BOP link setpoint timeout
7520 Communication/serial
interface No. 2
F0072/0048H 0000 USS/COMM link setpoint timeout
FF22 PID f/b above max value F0222/00DEH 0000 PID f/b above max value
FF35 Restart after fault retries F0035/0023H 0000 Restart after fault retries
FF40 Auto Cal failure F0040/0028H 0000 Auto Cal failure
FF42 Speed optimization failure F0042/002AH 0000 Speed optimisation failure
FF52 Belt failure detected F0452/01C4H 0000 Belt failure detected
FF80 ADC lost input signal F0080/0050H 0000 ADC lost input signal
FF85 External Fault F0085/0055H 0000 External Fault

Siemens MICROMASTER 430 Specifications

General

Power Range	7.5 kW to 250 kW
Voltage Range	380V to 480V
Frequency Range	0 Hz to 650 Hz
Protection Class	IP20
Input Frequency	47 Hz to 63 Hz
Digital Inputs	6
Cooling Method	Forced-air cooling
Communication	USS
Protection Features	Overvoltage, undervoltage, overcurrent, short-circuit, ground fault, overtemperature
Analog Inputs	2
Digital Outputs	3
Analog Outputs	2
Ambient Temperature	-10°C to +50°C
Control Type	Sensorless vector control