Siemens MICROMASTER 440 Series User Manual

8 Available options International English
MICROMASTER 440 Operating instructions
90 6SE6400-5CA00-0BP0
8.1 Available options
The following accessories are available as options for your MICROMASTER
MM440 Inverter. For more details please refer to the Reference Manual or contact
your local Siemens sales office if you require assistance.
Variant Dependent Options
 EMC filter, Class A
 Low leakage Class B filter
 Additional EMC filter, Class B
 Line commutating choke
 Output choke
 Gland plate
Variant Independent Options
 Basic Operator Panel (BOP)
 Advanced Operator Panel (AOP)
 PROFIBUS module
 PC to inverter connection kit
 PC to AOP connection kit
 BOP/AOP door mounting kit for single inverter control
 AOP door mounting kit for multiple inverter control
 “DriveMonitor” commissioning tool
http://nicontrols.com

Siemens MICROMASTER 440 Series Specifications

General

Power Range	0.12 kW to 250 kW
Output Voltage	0V to Input Voltage
Frequency Range	0 Hz to 650 Hz
Overload Capacity	150% for 60 seconds, 200% for 3 seconds
Cooling Method	Forced air cooling
Enclosure Rating	IP20
Control Modes	Vector control
Protection Features	Overvoltage, undervoltage, short circuit
Communication Interfaces	PROFIBUS, CANopen, RS485
Operating Temperature	-10°C to +50°C
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)