(GLWLRQ$ *HQHUDO'HILQLWLRQRI352),%86'3
PROFIBUS Optional Board Operating instructions
6SE6400-5AK00-0BP0
15
'DWDH[FKDQJHYLD352),%86'3
Data can be exchanged between the higher-level systems (e.g. SIMATIC,
SIMADYN D, PC/PGs) and the drives very quickly via the PROFIBUS-DP. Drives
are always accessed according to the master-slave principle. Drives are always
slave nodes. Each slave can be identified by its unique address on the bus (MAC).
6WDQGDUGVJXLGHOLQHVDQGRWKHULQIRUPDWLRQ
All the standards and guidelines listed below can be obtained from the PROFIBUS
User Organisation (PNO), www.profibus.com.
½ PROFIBUS
"Short Technical Description" September 1999
Order No. 4.001
½ PROFIBUS Specification (FMS, DP, PA)
All normative definitions in relation to the PROFIBUS specification according to
EN 50170 Vol. 2.0 (version 1.0)
Order No. 0.042 (English)
½ PROFIBUS-DP Expansions
includes acyclical communication functions with PROFIBUS-DP
"Extensions to EN 50170"
EN 50 170 Vol. 2 (version 2.0)
Order No. 2.082 (English)
½ PROFIBUS Technical Guideline
"Installation Guidelines for PROFIBUS-DP/FMS" September 1998
Order No. 2.111
½ PROFIBUS Guideline
"Connections for PROFIBUS" February 2000
Version 1.0
Order No. 2.141
½ PROFIBUS Guideline
"Optical Transmission System for PROFIBUS" July 1999 (Draft)
Version 2.0
Order No. 2.021
½ PROFIDrive Profile Version 2.0:
"Profile for Variable-Speed Drives" September 1997
PNO - PROFIBUS Profile - Order No. 3.071 (German) / 3.072 (English)
½ PROFIDrive Profile Version 3.0:
"PROFIDrive Profile Drives" September 2000 (Draft)
PNO - PROFIBUS Profile - Order No: 3.172 (English)
To Next Page
Loading...
Need help?
General
