Siemens Micromaster Profibus - EMC Information; 8 Appendix; Technical Data

(GLWLRQ$ $SSHQGL[
PROFIBUS Optional Board Operating instructions
6SE6400-5AK00-0BP0
59
 $SSHQGL[
 7HFKQLFDOGDWD
Table 8-1 Technical data
Order number 6SE6400-1PB00-0AA0
Size
(height x width x depth) 161 mm x 73 mm x 43.5 mm
Pollution severity Pollution severity 2 according to IEC 664-1 (DIN VDE
0110/T1),
No moisture condensation permitted in operation
Mechanical strength
In stationary state
- Deflection
- Acceleration
During transportation
- Deflection
- Acceleration
Acc. to DIN IEC 68-2-6 (with correctly installed board)
0.15 mm in 10 Hz to 58 Hz frequency range
19.6 m/s
2
in > 58 Hz to 500 Hz frequency range
3.5 mm in 5 Hz to 9 Hz frequency range
9.8 m/s
2
in > 9 Hz to 500 Hz frequency range
Climate class Class 3K3 to DIN IEC 721-3-3 (in operation)
Cooling method Natural air cooling
Permissible ambient or
coolant temperature
- In operation
- In storage
- In transit
-10° C to +50° C (14° F to 122° F)
-25° C to +70° C (-13° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
Permissible humidity rating Relative air humidity
<= 95 % in transit and storage
<= 85 % in operation (condensation not permissible)
Supply voltage 6.5 V ± 5 %, max. 300 mA, internal from basic converter
or 24V ± 10 %, max. 350 mA, from external source
Output voltage 5 V ± 10 %, max. 100 mA,
electrically isolated supply
- for the bus termination of the serial interface or
- for the supply of an OLP (Optical Link Plug)
Data transmission rate Max. 12 Mbaud
 (0&LQIRUPDWLRQ
The board complies with the following standards governing radio emissions and
interference immunity:
½ Radio emissions in accordance with EN55011 1991 Class A
½ Interference immunity in accordance with IEC 801-3 and EN61000-4-3