/LQNVWR352),%86'30DVWHU6\VWHPV (GLWLRQ$
PROFIBUS Optional Board Operating instructions
44 6SE6400-5AK00-0BP0
2SHUDWLRQRQ6,0$7,&6
352),%86'3LQWHUIDFHVLQ6,0$7,&6
Suitable S7 masters are, for example, the CPUs with integrated PROFIBUS-DP
interface such as CPU315-2DP, CPU413-2DP, CPU414-2DP or CPU416-2DP etc.,
or corresponding interface boards (CPs).
The master station as well as the entire PROFIBUS network are configured in the
STEP7 hardware manager.
0,&520$67(5DV352),%86'3VODYHRQ6
The MICROMASTER4 can be operated on a SIMATIC S7 as two different slave
types:
½ As a DP slave with standard functionality
½ As a DP slave with extended functionality for SIMATIC S7
0,&520$67(5DV'3VODYHZLWKVWDQGDUGIXQFWLRQDOLW\
The MICROMASTER4 with standard functionality is based on the GSD. It is
displayed directly below the SIMOVERT folder in the STEP 7 HW Catalog.
The GSD file (SIEM80B5.GSD) for MICROMASTER4 will be integrated in future
versions of STEP 7; it can be imported to other versions.
The communication board based on the integrated GSD can utilize the following
functions:
½ PPO type 1 or 3
½ 4 PZD for process data
½ Acyclical communication with a SIEMENS start-up tool (e.g. STARTER) and
SIMATIC HMI