Siemens Milltronics BW100 - Start up

Page 24 Milltronics BW100 - INSTRUCTION MANUAL 7ML19985DJ01
mmmmm
Start Up
Start Up
Program P005 - P017
refer to Maneuvering
on page 18 for
parameter selection
and changing values.
#for constant speed
applications, TB1 - 5/6
jumpered, value is
locked at 100.
* from design data
sheet, if provided
P017, test load *
e.g. 55.56 Kg / m
Examples are typical
P016, belt length
e.g. 65.72 m
P015, speed constant *
#
e.g. 100.3 pulse / m
P014, design speed *
e.g. 0.5 m/s
P011, design rate *
e.g. 200 t/h
program mode P005, units
e.g. 1, t/h