7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL Page 67
mmmmm
Troubleshooting
Maintenance
The BW100 requires no maintenance.
The external surface of the enclosure may be cleaned using a vacuum cleaner and a
clean dry paint brush. The display window should be cleaned with a moist non-abrasive
cloth.
It is a good idea to check the associated load sensing device, according to its instruction
manual.
Software Updates
The software can be updated from a floppy disk by use of a PC (IBM Compatible) with
Milltronics Dolphin software. It is recommended that a reset (P999) is done after the
software update followed by zero and span calibrations.
Direct zero entry (P367) and direct span entry (P368) will suffice in lieu of dynamic zero
and span calibrations. Therefore, zero and span counts should be recorded prior to doing
the software update.
To Next Page
Loading...
