Siemens Milltronics BW100 - Milltronics BW100; Milltronics BW100 Features

7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL Page 1
mmmmm
Introduction
Milltronics BW100
The Milltronics BW100 is an economical integrator for use with belt scales. The speed
and load signals from the conveyor and scale, are processed to derive rate of material
flow and totalization.
The primary values of speed and load, and the derived values of rate and total are
available for display on the local LCD, or as output in the form of analog mA, alarm relay
and remote totalization. BW100 supports Milltronics proprietary bipolar current loop for
long distance communication to PLC or computer. It is also compatible with Milltronics
Dolphin interface for remote display, programming and software upgrading.
Milltronics BW100 Features
• multi-field LCD display
• two remote totalizer contacts
• current loop for communications
• Dolphin compatibility
• programmable relay
• isolated mA output
• rate linearization
• local keypad
•Auto Zero
Note: The Milltronics BW100 is to be used only in the manner outlined in this
instruction manual.
Load
Speed
Material
total