Siemens Milltronics BW100 - Page 63

7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL Page 59
mmmmm
Parameters
P631 Totalizer 1 Resolution, Internal
This parameter sets the resolution of internal totalizer 1.
Entry:
1 = 0.001 (one thousandth)
2 = 0.01 (one hundredth)
3 = 0.1 (one tenth)
4 = 1 (unit)
5 = 10 (x ten)
6 = 100 (x hundred)
7 = 1000 (x thousand)
P632 Totalizer 2 Resolution, Internal
This parameter sets the resolution of internal totalizer 2.
Entry:
1 = 0.001 (one thousandth)
2 = 0.01 (one hundredth)
3 = 0.1 (one tenth)
4 = 1 (unit)
5 = 10 (x ten)
6 = 100 (x hundred)
7 = 1000 (x thousand)
P638 Totalizer 1 Resolution, External
This parameter sets the resolution of external totalizer 1.
Entry:
1 = 0.001 (one thousandth)
2 = 0.01 (one hundredth)
3 = 0.1 (one tenth)
4 = 1 (unit)
5 = 10 (x ten)
6 = 100 (x hundred)
7 = 1000 (x thousand)
P639 Totalizer 2 Resolution, External
This parameter sets the resolution of external totalizer 2.
Entry:
1 = 0.001 (one thousandth)
2 = 0.01 (one hundredth)
3 = 0.1 (one tenth)
4 = 1 (unit)
5 = 10 (x ten)
6 = 100 (x hundred)
7 = 1000 (x thousand)