Siemens MOBILETT Plus - Mechanical Inspection; Rear Wheels

Siemens AG SPR8-215.831.04.03.02 MOBILETT Plus/ -E/ -M
07.05 CS PS 24
Inspection and maintenance 25
Page 25 of 64
Medical Solutions
2.2 Mechanical inspection
2.2.1 Rear wheels
• Jack up one side of the unit with a piece of wood (Fig.1/p.25).
• Secure the rear wheel on the other side with two blocks. Do not apply the parking
brake.
• Remove the wheel:
- for MOBILETT Plus/Plus E (Fig.1/p.25)
- for MOBILETT Plus M (Fig.2/p.25)
SIM Drive belt (for MOBILETT Plus M only)
• Check the condition and tension of the drive belt.
NOTE
Under normal operating conditions, the drive belt does not require
adjustment throughout the lifetime of the system.
Fig. 1:
Fig. 2: