Siemens MOBILETT Plus - Arm System Mounting

Siemens AG SPR8-215.831.04.03.02 MOBILETT Plus/ -E/ -M
07.05 CS PS 24
Inspection and maintenance 33
Page 33 of 64
Medical Solutions
• Check the protective conductor connection to the plug. The protective conductor must
be securely attached and must be slightly longer than the other two wires. This applies
for all plug types.
• Close the plug after inspecting it.
2.2.11 Arm system mounting
Fig. 13:
Pos. 1 Upper link (check without torque)
Pos. 2 Check without torque
Pos. 3 Nut
Pos. 4 Upper link
Pos. 5 Lower link