62 Inspection and maintenance
MOBILETT Plus/ -E/ -M SPR8-215.831.04.03.02 Siemens AG
07.05 CS PS 24
Page 62 of 64
Medical Solutions
2.21 Motor drive function (MOBILETT Plus M only)
Fig. 36:
Pos. 1 Safety switch
Pos. 2 Forward
Pos. 3 Reverse
• Both switches must be activated to drive the unit.
• The drive speed must increase at a constant rate until a nominal speed of approx. 1
m/sec is reached.
• The drive is switched off if one of the two switches is released.
PMF Forward/reverse
PMF Acceleration
SIE Shutdown function
To Next Page
Loading...
