Siemens MOBILETT Plus - Checking the Kv and Mas Displays

Siemens AG SPR8-215.831.04.03.02 MOBILETT Plus/ -E/ -M
07.05 CS PS 24
Inspection and maintenance 61
Page 61 of 64
Medical Solutions
2.20 Checking the kV and mAs displays
PMF "Ready" indicator
SIE Visibility of displays
SIE Correct displays
• Check whether the green "ready" lamp lights up approximately 2 minutes after the
system is switched on. If it doesn’t light up, an error message will appear on the dis-
play. Refer to the chapter "Display messages" in the service instructions.
• Check whether the kV and mAs values are clearly visible from the operator’s position.
Determine whether all exposure parameters are displayed correctly.