Siemens AG SPR8-215.831.04.03.02 MOBILETT Plus/ -E/ -M
07.05 CS PS 24
General 5
Page 5 of 64
Medical Solutions
1-
1 General
1.1 Check at the beginning of the maintenance session
The system condition should be checked via remote service (if available). If error mes-
sages appear, the necessary spare parts have to be ordered. If necessary, a new appoint-
ment for Preventive Maintenance has to be arranged.
A quick check must be carried out directly at the system. For this, the "Quality Assurance"
procedure or similar procedures can be used.
Additionally, check the system logbook for system problems (if available).
The necessary escalation measures have to be initiated after deviations. If necessary, a
new appointment for Preventive Maintenance has to be arranged.
To Next Page
Loading...
