Siemens AG SPR8-215.831.04.03.02 MOBILETT Plus/ -E/ -M
07.05 CS PS 24
Inspection and maintenance 27
Page 27 of 64
Medical Solutions
• Lock the rear wheels with the parking brake.
• Lift up the front wheels using the tilt bar and jack them up with a piece of wood
(Fig.4/p.26).
SIM Secure mounting
SIM Ease of movement
• Check that the wheels are securely mounted and that they turn freely. If necessary,
tighten the Allen screws (Fig.4/p.26).
PMP Cleaning
If the wheels need thorough cleaning, they must be removed:
• Remove the Allen screws.
• Remove the wheels (Fig.5/p.26).
• Clean the wheels.
• Remount the wheels.
• Check the other set of wheels in the same way.
2.2.3 Supporting wheels
Fig. 6:
Pos. 1 Supporting wheels
• Lock the rear wheels with the parking brake.
• Jack up one side of the unit with a piece of wood.
SIM Ease of movement
SIM Damage
• Check that the supporting wheels turn freely and do not show any signs of damage. If
they must be replaced, refer to ”Replacing the supporting wheels” in the service instruc-
tions.
To Next Page
Loading...
