RUGGEDCOM RX1400
Installation Guide
Chapter 1
Introduction
Feature Highlights 1
Introduction
The RUGGEDCOM RX1400 is a multi-protocol intelligent node that combines Ethernet switch, routing and firewall
functionality with various wide area connectivity options.
The RUGGEDCOM RX1400 switch, with its rugged metal housing, is designed for DIN rail, panel or rack mounting.
The RUGGEDCOM RX1400 provides a high level of immunity to electromagnetic interference, heavy electrical
surges, extreme temperature and humidity for reliable operation in harsh environments.
The device has IP40 degree protection, does not use internal fans for cooling and supports a -40 to 85 °C (-40 to
185 °F) extended temperature range. It is also certified for use in Class I, Division 2, Zone 2 hazardous locations.
Primary benefits include:
• Cost effective solution for large scale deployments
• Space-saving installation
• Reduced maintenance costs
• Customer data protection
• Support for additional applications
The RUGGEDCOM RX1400 is designed to support primary communications over public mobile networks and
leverage enhanced capabilities of mobile networks, while making reliable and secure connections for mission
critical applications in electric utility substations, traffic control cabinets, railway applications, oil and gas and
other harsh environment applications.
IMPORTANT!
To comply with FCC regulations, this device must only be used for mobile and fixed applications.
CONTENTS
• Section1.1, “Feature Highlights”
• Section1.2, “Description”
Section1.1
Feature Highlights
Cellular Interface
• LTE: 700- B13, B17, 800/900/1800/2100/2600 MHz
• UMTS/HSPA+: 850/900/1900/2100 MHz
• Quad-Band EDGE/GPRS/GSM
• GNSS
WLAN Interface
• WLAN Access Point and Client: WLAN Direct® (multi-
channel, multi-role) dual band transceiver support of
IEEE 802.11a/b/g/n for 2.4 GHz and 5 GHz
Ethernet Interfaces
• 4 x 10/100Base-T RJ45 ports
To Next Page
Loading...
Need help?
General
