Siemens RUGGEDCOM RX1400 Installation Guide

Chapter 4
Technical Specifications
RUGGEDCOM RX1400
Installation Guide
30 Fast Ethernet Port Specifications
Parameter Value (Resistive Load)
125 VDC
Rated Switching Current 2 A @ 240 VAC
0.15 A @ 125 VDC
2 A @ 30 VDC
Maximum Switching Capacity 150 W
500 VA
Section4.3
Fast Ethernet Port Specifications
The RUGGEDCOM RX1400 features four 10/100Base-TX fast Ethernet (FE) ports with RJ45 connectors. For more
information about the serial ports, refer to Section3.1, “Fast Ethernet Ports”.
Speed
c
100 Mbps
Connector RJ45
Duplex
c
FDX/HDX
Cable Type
d
> CAT-5
Wiring Standard
e
TIA/EIA T568A/B
Maximum Distance 100 m (328 ft)
Isolation
f
1.5 kV
c
Auto-negotiating.
d
Shielded or unshielded.
e
Auto-crossover and auto-polarity.
f
RMS 1 minute.
Section4.4
Serial Port Specifications
The RUGGEDCOM RX1400 supports two serial ports with female DB9 connectors. For more information about the
serial ports, refer to Section3.3, “Serial Ports”.
Baud Rate 1200 to 230400 kbps
Connector DB9
Isolation 2.5 kV

Siemens RUGGEDCOM RX1400 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RX1400
Category	Network Hardware
Language	English