EasyManuals Logo

Siemens RUGGEDCOM RX1400 Installation Guide

Siemens RUGGEDCOM RX1400
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Chapter 4
Technical Specifications
RUGGEDCOM RX1400
Installation Guide
34 Operating Environment
Host Interface 4-Bit SDIO
Maximum EIRP < 200 mW at 5250 to 5350 MHz
Section4.7
Operating Environment
The RUGGEDCOM RX1400 can operate under the following environmental conditions:
Parameter Range Comments
Ambient Operating Temperature -40 to 85 °C
(-40 to 185 °F)
j
Measured from a 30 cm (12 in) radius surrounding the center of the
enclosure.
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature -40 to 85 °C
(-40 to 185 °F)
j
Maximum ambient operating temperature is 70 °C (158 °F) when the device is installed along with Underwriter Laboratories (UL) listed devices.
Section4.8
Mechanical Specifications
Dimensions Refer to Chapter5, Dimension Drawings
Weight 2.5 kg (5.5 lb)
Ingress Protection IP40
Enclosure Aluminum

Table of Contents

Other manuals for Siemens RUGGEDCOM RX1400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens RUGGEDCOM RX1400 and is the answer not in the manual?

Siemens RUGGEDCOM RX1400 Specifications

General IconGeneral
BrandSiemens
ModelRUGGEDCOM RX1400
CategoryNetwork Hardware
LanguageEnglish

Related product manuals