Siemens S7-1200 - Inserting a CPU

Device configuration
5.1 Inserting a CPU
S7-1200 Programmable controller
138 System Manual, 03/2014, A5E02486680-AG
To create the device configuration,
add a device to your project.
•
In the Portal v
iew, select "Devices
& Networks" and click "Add new
device".
•
In the Project view, under the
project name, double-click "Add
new device".
5.1
Inserting a CPU
You create your device configuration by inserting a CPU into your project. Be sure you insert
the correct model and firmware version from the list. Selecting the CPU from the "Add new
device" dialog creates the rack and CPU.
"Add new device" dialog