Siemens S7-1200 - Cpu 1211 C; General Specifications and Features

Technical specifications
A.2 CPU 1211C
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
837
A.2
CPU 1211C
A.2.1
General specifications and features
Table A- 9 General specifications
Technical data
CPU 1211C
AC/DC/Relay
CPU 1211C
DC/DC/Relay
CPU 1211C
DC/DC/DC
Order number
6ES7 211-1BE40-0XB0
6ES7 211-1HE40-0XB0
6ES7 211-1AE40-0XB0
Dimensions W x H x D (mm)
90 x 100 x 75
90 x 100 x 75
90 x 100 x 75
Shipping weight
420 grams
380 grams
370 grams
Power dissipation
10 W
8 W
8 W
Current available (CM bus)
750 mA max. (5 VDC)
750 mA max. (5 VDC)
750 mA max. (5 VDC)
Current available (24 VDC) 300 mA max. (sensor
power)
300 mA max. (sensor
power)
300 mA max. (sensor
power)
Digital input current consumption
(24 VDC)
4 mA/input used 4 mA/input used 4 mA/input used
Table A- 10 CPU features
Technical data
Description
User memory
Work
30 Kbytes
Load
1 Mbyte internal, expandable up to SD card size
Retentive
10 Kbytes
On-board digital I/O
6 inputs/4 outputs
On-board analog I/O
2 inputs
Process image size
1024 bytes of inputs (I) /1024 bytes of outputs (Q)
Bit memory (M)
4096 bytes
Temporary (local) memory
• 16 Kbytes for startup and program cycle (including associated FBs and
FCs)
• 6 Kbytes for each of the other interrupt priority levels (including FBs and
FCs)
Signal modules expansion none
SB, CB, BB expansion
1 max.
Communication module expansion
3 CMs max.
High-speed counters Up to 6 configured to use any built-in or SB inputs. Refer to table, CPU 1211C:
HSC default address assignments (Page 411)
100/
1
80 kHz (Ia.0 to Ia.5)
Pulse outputs
2
Up to 4 configured to use any built-in or SB outputs
100 kHz (Qa.0 to Qa.3)
Pulse catch inputs
6