Siemens S7-1200 - SB 1232 1 Analog Output Specifications

Technical specifications
A.12 Analog signal boards (SBs)
S7-1200 Programmable controller
948 System Manual, 03/2014, A5E02486680-AG
Table A- 210 Connector pin locations for SB 1231 AI x 12 bit (6ES7 231-4HA30-0XB0)
Pin
X19 (gold)
1
No connection
2
No connection
3
AI R
4
AI 0+
5
AI 0+
6
AI 0-
A.12.2
SB 1232 1 analog output specifications
Table A- 211 General specifications
Technical data
SB 1232 AQ 1 x 12 bit
Order number
6ES7 232-4HA30-0XB0
Dimensions W x H x D (mm)
38 x 62 x 21
Weight
40 grams
Power dissipation
1.5 W
Current consumption (SM Bus)
15 mA
Current consumption (24 VDC)
40 mA (no load)
Table A- 212 Analog outputs
Technical data
SB 1232 AQ 1 x 12 bit
Number of outputs
1
Type
Voltage or current
Range
±10 V or 0 to 20 mA
Resolution Voltage: 12 bits
Current: 11 bits
Full scale range (data word)
Refer to the output ranges for voltage and current
(Page 951).
Voltage: -27648 to 27648
Current: 0 to 27648
Accuracy (25 °C / -20 to 60 °C)
±0.5% / ±1% of full scale
Settling time (95% of new value) Voltage: 300 μS (R), 750 μS (1 uF)
Current: 600 μS (1 mH), 2 ms (10 mH)
Load impedance Voltage: ≥ 1000 Ω
Current: ≤ 600 Ω
Behavior on RUN to STOP
Last value or substitute value (default value 0)
Isolation (field side to logic)
None
Cable length (meters)
100 m, twisted and shielded