Siemens S7-1200 - Page 949

Technical specifications
A.12 Analog signal boards (SBs)
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
949
Table A- 213 Diagnostics
Technical data
SB 1232 AQ 1 x 12 bit
Overflow/underflow
Yes
Short to ground (voltage mode only)
Yes
Wire break (current mode only)
Yes
Table A- 214 Wiring diagram for the SB 1232 AQ 1 x 12 bit
SB 1232 AQ 1 x 12 bit (6ES7 232-4HA30-0XB0)
Note: Connectors must be gold. See Appendix C, Spare Parts for order number.
Table A- 215 Connector pin locations for SB 1232 AQ 1 x 12 bit (6ES7 232-4HA30-0XB0)
Pin
X19 (gold)
1
AQ 0M
2
AQ 0
3 GND
4
No connection
5
No connection
6
No connection