Siemens S7-1200 - Page 375

Extended instructions
8.7 Recipes and Data logs
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
375
Parameter and type
Data type
Description
ERROR OUT Bool The ERROR bit is TRUE for one scan, after the last request was
terminated with an error. The error code value at the STATUS
parameter is valid only during the single scan where ERROR =
TRUE.
• 0: No warning or error
• 1: An error has occurred. The STATUS parameter provides
information on the type of error.
STATUS
OUT
Word
Execution condition code
Table 8- 154 Values of ERROR and STATUS
ERROR
STATUS
(W#16#....)
Description
0
0000
No error
0
7000
Call with no REQ edge: BUSY = 0, DONE = 0
0
7001
First call with REQ edge (working): BUSY = 1, DONE = 0
0
7002
N
th
call (working): BUSY = 1, DONE = 0
1
8070
All instance memory is in use.
1
8090
File name contains invalid characters
1
8091
The data structure referenced with RECIPE_DB cannot be processed.
1
8092
Data structure specified in RECIPE_DB exceeds 5000 bytes
1
80B3
Not enough space in on MC or in internal load memory
1
80B4
MC is write protected
1
80B6
Recipe DB attribute "Only store in load memory" is not enabled.
1
80C0
CSV file is temporarily locked
1
80C1
DB is temporarily locked