Technical specifications
A.17 Input simulators
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
979
Safe use of input simulators
These input simulators are not approved for use in Class I DIV 2 or Class I Zone 2
hazardous locations. The switches present a potential spark hazard/explosion hazard if
used in a Class I DIV 2 or Class I Zone 2 location. Unapproved use could result in death or
serious injury to personnel, and/or damage to equipment.
Use these input simulators only in non-hazardous locations. Do not use in Class I DIV 2 or
Class I Zone 2 hazardous locations.
8 Position Simulator (6ES7 274-1XF30-0XA0)
24 VDC sensor
14 Position Simulator (6ES7 274-1XF30-0XA0)
24 VDC sensor
wer out
To Next Page
Loading...
