Appendix
A.1 Modbus TCP
130 Equipment Manual, 09/2022, L1V30415168B-03
A.1.13 Modbus command parameters
Addressing the command parameters
You can apply the Modbus function code 0x06 to the command parameters.
Table A- 16 Command parameters
Offset
Number
of
Name Unit Format Value range Access
Reset the device to the factory
settings
Device reset (without
changing the Modbus address)
Active energy
import tariff 1
Active energy
import tariff 2
Active energy
export tariff 1
Active energy
export tariff 2
Reactive energy
import tariff 1
Reactive energy
import tariff 2
Reactive energy
export tariff 1
Reactive energy
export tariff 2
Synchronization of the
demand period
Acknowledge the diagnostics
bit
1)
(cf. stored bits in
unsigned long beginning
To Next Page
Loading...
