Equipment Manual, 09/2022, L1V30415168B-03
29
3.1 Introduction
The use of damaged devices may result in death, serious injury, or property damage.
Do not install or start up damaged devices.
Installation location
The PAC3200T device is mounted on a TH35 rail (complying with EN 60715) and is intended
for installation in permanently installed systems within closed rooms.
The measuring device can be mounted in any position. The device can be mounted in a
horizonal or in a vertical position. For ergonomic reasons, we recommend mounting the
device horizontally at the user's eye level.
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the
function of the device. Store the
device in the operating room for at least 2 hours before
To Next Page
Loading...
