Operation
5.2 Supporting software
48 Equipment Manual, 09/2022, L1V30415168B-03
5.2.2 powerconfig
The powerconfig software is the combined commissioning and service tool for
communication-capable measuring devices and circuit breakers from the SENTRON family.
The PC-based tool facilitates parameterization of the devices, resulting in substantial time
savings, particularly when several devices have to be set up. Using powerconfig, measuring
devices from the 7KM PAC series can be parameterized and operated via various
communication interfaces, and measured values can be documented and monitored.
powerconfig provides the following functions:
• Parameterization, documentation, operation and monitoring in one software package
• User-friendly documentation of settings and measured values
• Clear presentation of the available parameters including validity testing of the inputs
• Display of the available device statuses and measured values in standardized views
• Project-oriented storage of device data
• Consistent operation and usability
• Support of the various communication interfaces (Modbus RTU, Modbus TCP, PROFIBUS,
PROFINET)
• Updating of device firmware and loading of language packs (device-dependent)
Note
Launch the Online Help in powerconfig by pressing the *F1* key.
To Next Page
Loading...
