Equipment Manual, 09/2022, L1V30415168B-03
73
7.1 Cleaning
Clean the device as required. Use a dry cloth for this.
Damage may result from use of detergents.
Detergents can damage the device. Do not use detergents.
Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this equipment before working on this device.
7.2 Calibration
The device has been calibrated by the manufacturer before shipping. Recalibration is not
required provided the environmental conditions are maintained.
7.3 Firmware updates
The PAC3200T supports firmware updates.
When updating, always use the latest version of the powerconfig configuration software. For
update instructions, please see the related documentation and the online help for the
configuration software.
For an update, the write protection and password protection must be temporarily disabled.
Please ensure that the environment is safe.
The last devices settings made remain unchanged.
The current firmware can be downloaded via the Siemens homepage (https://sie.ag/3Q8I2tn
).
To Next Page
Loading...
Need help?
General
