Siemens SIMATIC ET 200M - 10.4 Technical specifications of the IM 153-4 PN interface module

Technical Specifications
10.4 Technical specifications of the IM 153-4 PN interface module
ET 200M
234 Operating Instructions, 12/2008, EWA-4NEB780600602-08
10.4 Technical specifications of the IM 153-4 PN interface module
Order Number
6ES7153-4AA01-0XB0
Properties
The IM 153-4 PN interface module has the following properties:
● It interconnects the ET 200M with PROFINET IO.
● A maximum of 12 modules can be operated with the IM 153-4 PN
● It prepares the data for the inserted modules.
The following settings can be made: SM, CP, non-assignable FM
● It supplies the backplane bus
● Integrated switch with 2 ports
● Transfer and backup of the device name on SIMATIC Micro Memory Card
● Firmware update using a SIMATIC Micro Memory Card or PROFINET IO
● The reference potential M of the rated supply voltage of the IM 153-4 PN to the rail
(protective conductor) is connected by means of an RC combination, thus permitting an
ungrounded configuration
● Supported Ethernet services
– ping
– arp
– Network diagnostics (SNMP): LLDP-MIB / MIB-2
– Resetting SNMP parameters to the factory settings
– I&M data
● Interrupts
– Diagnostic interrupts
– Hardware interrupts
– Removal / insertion interrupts
– Maintenance interrupts
● Port diagnostics
● Port disabling
● Support for real-time communication (RT Class 1 and Class 2).
● Maximum address space of 200 bytes I/O data.
● Data records for I/O modules
● As of 6ES7153-4AA01-0XB0:
– Isochronous real-time communication
–
Minimum updating time 250 μs with IRT
– Prioritized star
tup
– Device replacement without removable media / programming device
– Changing IO devices during operation (changing partner ports)