ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
267
Index
2
24 V DC supply, 48
A
Access aids in the operating instructions, 6
Active bus module, 15, 44
installing, 66
Order number, 247
Ambient temperature
permissible, 41
Approvals, 225
Assigning device names, 98
B
Backplane bus
Changing, 101
Backplane bus cover, 15, 66
Block diagram
IM 153-1, 233
IM 153-2, 233
IM 153-2 FO, 233
Boot
IM 153-2, 92
IM 153-2 FO, 92
IM 153-2 FO with time stamping, 94
IM 153-2 with time stamping, 94
Bus cable, 16
Order number, 248
Bus connector
Order number, 247, 248
wiring, 72
Bus module
active, 15, 44
Active bus module defective, 223
Installing, 66
number in installation setup for module change
during operation, 46
Order number, 247
Replacing, 115
Bus module cover, 15, 66
C
CE
Certification, 225
Certification
CE, 225
CSA, 226
FM, 227
Marine, 228
UL, 226
Changes
since the previous manual, 4
Channel-related diagnostics, 200
Error messages, 202
channel-specific error messages, 202
Clearance Measurements, 41
Commissioning
Requirements, 89
Communication processor, 16
Compatibility
IM 153 zu IM 153-1, 241
Configuration message frame
Look on the Internet under ..., 3, 5
Configuration state
Incorrect, 223
Configuration with active bus modules, 66
Configuring
in STEP 7 (PROFINET IO), 97
Ports, 100
using the GSD file (PROFINET IO), 97
Connecting
IM 153-4 PN, 75
Connection of protective conductor
on rail, 63
Contacts, 6
Controlling
general, on operating the ET 200M, 47
Covers for bus modules
Order number, 247
CSA
Certification, 226
Current consumption
Controlling, 49
To Next Page
Loading...
