ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
3
Preface
Purpose of the operating instructions
The information contained in these operating instructions enables you to operate an IM 153
interface module together with the modules of the S7-300 spectrum in the distributed I/O ET
200M as a DP slave.
Basic knowledge required
To understand the operating instructions you require general experience in the field of
automation engineering.
Range of validity of these operating instructions
Module Order number As of product version
6ES7153-1AA03-0XB0 02 IM 153-1
6ES7153-1AA83-0XB0 01
6ES7153-2AA02-0XB0 07
6ES7153-2BA00-0XB0 01
6ES7153-2BA01-0XB0 01
6ES7153-2BA02-0XB0 01
6ES7153-2BA81-0XB0 01
IM 153-2
6ES7153-2BA82-0XB0 01
6ES7153-2AB01-0XB0 06 IM 153-2 FO
6ES7153-2BB00-0XB0 01
6ES7153-4AA00-0XB0 01 IM 153-4 PN
6ES7153-4AA01-0XB0 01
Declaration: In the following the term IM 153-x is used in the operating instructions, apart
from when a description refers directly to a special variant of the IM 153-x.
A variant of the IM 153-1 as well as of the IM 153-2 is also available as a module for use in
expanded environmental conditions ("outdoor"). To find out under which climatic and
mechanical environmental conditions you can use the IM 153-1 /-2, refer to the "S7-300
automation system, module specifications
(http://support.automation.siemens.com/WW/view/en/8859629
)" Reference Manual.
With the IM 153-x in the latest version we reserve the right to enclose a product information
bulletin containing up-to-date information regarding the respective IM 153-x interface module
or the operating instructions.
The production information can also be found on the Internet
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=
en). There, search for "IM 153-2", for example.
To Next Page
Loading...
Need help?
General
