Technical information
8.2 Certificates and approvals
Comfort Panels
186 Operating Instructions, 08/2018, A5E36770603-AC
IECEx approval
The following approvals apply to the HMI device in accordance with
● EN 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
● IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type of
protection "n")
● IEC 60079-31 (Explosive atmospheres - Part 31: Equipment dust ignition protection by
enclosure "t")
valid:
Ex nA IIC T4 Gc
Ex tc IIIC T70°C Dc
The IECEx certificate is available on the Internet at: Certificates for Comfort Panels
(http://support.automation.siemens.com/WW/view/en/47182890/134200
)
The table below describes the test numbers of the HMI device classes:
Siemens AG
Werner-von-Siemens-Strasse 50
D-92224 Amberg
Germany
Siemens Industrial Automation Products Ltd.
Tianyuan Road No. 99
High Tech Zone West,
Chengdu City, Sichuan Province 611731
Comfort Panel IECEx DEK 13.0085X
IEC 61131
The devices meet the requirements and criteria of IEC 61131-2, Programmable Logic
Controllers, Part 2: Operating resource requirements and tests.
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4 Generic standards – Emission
standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4 Generic standards –
Emission standard for industrial environments.
To Next Page
Loading...
