Technical Support
A.4 System alarms
Comfort Panels
Operating Instructions, 08/2018, A5E36770603-AC
231
System alarms on the HMI device provide information about internal states of the HMI device
and the controller.
Note
System alarms are only indicated if an alarm window was configured. System alarms are
output in the language currently set on your HMI device.
System alarms may contain encrypted parameters which are relevant to troubleshooting
because they provide a reference to the source code of the runtime software. These
parameters are output after the text "Error code:".
Read the notes on configuring system alarms and using the alarm buffer in the section
"Memory concept (Page 61)".
Description of the system alarms
A listing of all system alarms for your HMI device is provided in the online help of your
configuration software.
To Next Page
Loading...
