Siemens SIMATIC HMI - 4 Commissioning the Device; Overview; Firmware and Software; Memory Concept

Comfort Panels
Operating Instructions, 08/2018, A5E36770603-AC
61
Commissioning the device
4
4.1
Overview
4.1.1
Firmware and software
Firmware and software for your HMI device are continually undergoing further developed.
Check regularly whether software updates or patches are available for your HMI device and
install the latest versions.
You can find the latest updates and patches for your HMI device on the Internet
(https://support.industry.siemens.com/cs/ww/en/
). Enter the article number of your HMI
device as a search term and filter the contributions according to the by contribution type
"Download".
4.1.2
Memory concept
The HMI devices use the following memory types:
●
Intern memory
●
Memory card
for data and logs
●
System memory card
for "automatic backup"
● USB port for a
USB storage medium
with data
Note
Using the memory card for logs
Due to the high
number of read/write cycles, we recommend that you use the memory card
rather than the USB interface for logs.