Siemens SIMATIC HMI - Accessories

Overview
1.4 Accessories
Comfort Panels
22 Operating Instructions, 08/2018, A5E36770603-AC
You can fasten the USB and PROFINET connecting cables to the rear panel of the HMI
device with cable ties.
With the 4" and 7" models, protect the cables with a separate strain relief. Install the strain
relief on the HMI device.
See also
Description of the interfaces (Page 221)
1.4
Accessories
An accessory kit with the necessary accessories is included with the HMI device.
Note
This section contains a selection of accessories that is suitable for your HMI device. You can
find additional versions of this selection and the complete accessories portfolio in the
Industr
y Mall on the Internet
(
https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10144445). Details
such
as the delivery quantity and technical specifications of accessories can be found in the
Industry Mall under the respective article numbers.
HMI I/O components
Name
Article number
Converter RS 422 to RS 232 for connecting third-party controllers
6AV6671-8XE00-....
90° elbow adapter for RS422/RS485 interface
6AV6671-8XD00-....
Plug for the power supply of the HMI device, 2-pin, screw technology
6AV6671-8XA00-....
Plug for the power supply of the HMI device, 2x2-pin, spring-loaded
terminal technology
6ES7193-4JB00-....
"...." stands for the variant key of the article number.
Protective films
Name
Article number
Protective film 4" widescreen for KTP400 Comfort
6AV2124-6DJ00-....
Protective film 7" widescreen for TP700 Comfort
6AV2124-6GJ00-....
Protective film 9" widescreen for TP900 Comfort 6AV2124-6JJ00-....
Protective film 12" widescreen for TP1200 Comfort
6AV2124-6MJ00-....
Protective film 15" widescreen for TP1500 Comfort 6AV2124-6QJ00-....
Protective film 19" widescreen for TP1900 Comfort
6AV2124-6UJ00-....
Protective film 22" widescreen for TP2200 Comfort
6AV2124-6XJ00-....
"...." stands for the variant key of the article number.