Siemens SIMATIC HMI - 8 Technical Information; Software License Agreements; Certificates and Approvals

Technical information
8.2 Certificates and approvals
Comfort Panels
Operating Instructions, 08/2018, A5E36770603-AC
185
FM Approval
Factory Mutual Research (FM) conforming to
● Approval Standard Class Number 3611, 3600, 3810
● CSA C22.2 No. 213
● CSA C22.2 No. 61010.1
● ANSI/ISA IEC61010-1
● ANSI/ISA 12.12.01
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4
Ex approval
The following approvals apply to the HMI device in accordance with
● EN 60079-0:2012 +A11 2013
● EN 60079-15:2010
● EN 60079-31:2014
valid:
II 3 G Ex nA IIC Tx Gc
II 3 D Ex tc IIIC T 70 °C Dc IP65
x: Temperature values, see EC design examination certificate
You can find additional information on use of the HMI device in hazardous areas under:
ATEX-FAQ (https://support.industry.siemens.com/cs/ww/en/view/291285
)
The EC type examination certificate is available on the Internet at: Certificates for Comfort
Panels (http://support.automation.siemens.com/WW/view/en/47182890/134200
)
The table below describes the test numbers of the HMI device classes:
Manufacturer sites
HMI device class
Test number
Siemens AG
Werner-von-Siemens-Strasse 50
D-92224 Amberg
Germany
Siemens Industrial Automation Products Ltd.
Tianyuan Road No. 99
High Tech Zone West,
Chengdu City, Sichuan Province 611731
P. R. China
Comfort Panel DEKRA11ATEX0005 X