Setting parameters for blocks
3.4 Programming Ident blocks
Ident profile and Ident blocks, standard function for Ident systems
60 Function Manual, 10/2018, C79000-G8976-C387-04
Table 3- 40 ATTRIBUTE "0x87" (data type "IID_READSTAT_87_RF600")
Version of firmware highbyte
Version of firmware lowbyte
Selected comunication typ
Radio communication profile (country specific radio
standart)
The internal time stamp of the reader that relates to this event is output. The internal reader time stamp is not synchro-
nized with UTC.
The antenna status relates to the "ATTRIBUTE" (bits 0 and 1) of the last executed "SET-ANT" or to the default value set
by "INIT"/"WRITE-CONFIG". With "INIT"/"WRITE-CONFIG" of the RF620R, the default value is "1" (int. antenna on),
with the RF630R, it is "3" (antennas 1 and 2 on).
Table 3- 41 ATTRIBUTE "0x88" (data type "IID_READSTAT_88_RF600")
SLG status mode(Subcommand)
Version of firmware (High-Byte)
Version of firmware (Low-Byte)
Selected communication type