Siemens SIMATIC Ident - Page 61

Setting parameters for blocks
3.4 Programming Ident blocks
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
61
Name
Type
Comment
expert mode
BYTE
Expert mode
status_ant
BYTE
Status of antenna
2)
scanning_time_SLG
BYTE
Radio communication profile (country specific radio
standart)
MDS control
BYTE
Presence mode
blink pattern
BYTE
Blink Pattern
act algor Single Tag
Bool
Single Tag [1]
act algor ITF Phase2
Bool
ITF Phase2 [2]
act algor ITF Phase1
Bool
ITF Phase1 [3]
act algor Smoothing
Bool
Smoothing [4]
act algor Blacklist
Bool
Blacklist [5]
act algor RSSI Threshold
Bool
RSSI Threshold [6]
act algor Power Ramp
Bool
Power Ramp [7]
act algor Power Gap
Bool
Power Gap [8]
Reserved1
Bool
Reserved1 [1]
Reserved2
Bool
Reserved2 [2]
Reserved3
Bool
Reserved3 [3]
Reserved4
Bool
Reserved4 [4]
act algor EPC MemBankFilter
Bool
EPC MemBankFilteres [5]
act algor Tag Holg
Bool
Tag Hold [6]
act algor Multi Tag
Bool
Multi Tag [7]
act algor ISTM
Bool
ISTM [8]
reserved word2
WORD
Reserved
reserved word3
WORD
Reserved
reserved word4
WORD
Reserved
filtered max rssi
BYTE
Maximum RSSI value of a tag, of all filtered tags
reserved byte2
BYTE
Reserved
filtered tags rssi
BYTE
Number of tags, filtered out by the RSSI threshold
reserved byte3
BYTE
Reserved
filtered tags black list
WORD
Number of tags, filtered out via Black-List
filtered tags epc data
WORD
Number of tags, filtered out via EPC Data Filter
filtered tags smoothing
WORD
Number of tags in Tag List of status Not-Observed
itf ph1 max detect
WORD
Number of reads of a Tag, filtered out via ITF-phase 1
itf ph1 tags detect
WORD
Number of tags, filtered out via ITF-phase 1
itf ph2 max detect
WORD
Number of reads of a Tag, filtered out via ITF-phase 2
itf ph2 tags detect
WORD
Number of tags, filtered out via ITF-phase 2
filtered_istm_min_dist
WORD
Minimum distance of tags according to sorting criterion
of ISTM
filtered istm tags
WORD
Number of tags, filtered out via ISTM algorithm
last error
BYTE
error code of the last occuring error (last command)
reserved byte4
BYTE
Reserved
error command1
WORD
Last command (has lead to error code) "last error"
error command2
WORD
Last command (has lead to error code) "last error"
error command3
WORD
Last command (has lead to error code) "last error"
reserved word5
WORD
Reserved
reserved_array_byte
ARRAY[1..30]
of Byte
Table 3- 42 ATTRIBUTE "0x89" (data type "IID_READSTAT_89_RF68xR") compatible with RF61xR/RF68xR
Name
Type
Comment
status info
BYTE
SLG status mode(Subcommand)
hardware version
BYTE
Version of hardware
firmware_version
ARRAY[1..4] of
CHAR
Version of firmware
config ID
DWORD
Unix timestamp
inventory_status
WORD
0=inventory not active; 1=inventory active; 2=presence
mode active
sum of filtered tags
WORD
All filtered Tags
filtered smoothing
WORD
Filtered Tags trough Smoothing
filtered blacklist
WORD
Filtered Tags trough Blacklist