Setting parameters for blocks
3.4 Programming Ident blocks
Ident profile and Ident blocks, standard function for Ident systems
66 Function Manual, 10/2018, C79000-G8976-C387-04
Table 3- 47 ATTRIBUTE "0x80" ("IID_TAG_STATUS_80_MOBY_U" data type)
Unique indentifier (MDS-Number)
Sum of subframe access Byte 1
Sum of subframe access Byte 2
Sum of subframe access Byte 3
Sum of subframe access Byte 4
Sum of search mode access Byte 1
Sum of search mode access Byte 2
Date of last sleep-time change (week of year)
Date of last sleep-time change (year)
Battery power left (percent) Byte 1
Battery power left (percent) Byte 2
Table 3- 48 ATTRIBUTE "0x82" ("IID_TAG_STATUS_82_RF300" data type)
Magnetic flux density: correlation between limit-value
Error counter passive: distortion without communication
Error counter active: distortion during communication
Presence counter: measure value for presence time
Table 3- 49 ATTRIBUTE "0x83" ("IID_TAG_STATUS_83_ISO" data type)
Size of Memory (high Byte)
Size of memory (low Byte)
Write protection status EEPROM
Size of a block in addressable memory
Number of blocks in addressable memory
Table 3- 50 ATTRIBUTE "0x84" ("IID_TAG_STATUS_84_RF600" data type)
Antenna which has observed the MDS