Siemens SIMATIC RF650R User Manual

Programming via XML interface
10.4 XML EventReports
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
265
Result code
Name
Description
hex
dec
0x43 67 ERROR_ANTENNA An antenna error was detected during
command execution.
You can find additional information on an-
tenna errors and possible solutions in the
section "XML/PLC error messages
(Page 290)".
0x46 70 ERROR_INVALID_READER_
STATUS
The specified command is not permitted in
the current reader status.
0xC1
193
ERROR_TAGFIELD_NOT_FOUND
The specified tag field is unknown.
0xCA
202
ERROR_MISCELLANEOUS
A general error has occurred.
0xCB
203
ERROR_CONFIGURATION
A configuration error has occurred.
0x61 97 ERROR_COMMAND_NOT_
SUPPORTED
The command is not supported by the
reader or is unknown.
0x63 99 ERROR_PARAMETER_INVALID_
VALUE
A parameter has an invalid value.
0xE1 225 ERROR_PARAMETER_MISSING A necessary parameter has not been speci-
fied.
0xE2 226 ERROR_PARAMETER_INVALID_
FORMAT
A parameter has an incorrect format
0xE3 227 ERROR_PARAMETER_INVALID_
TYPE
A parameter has the wrong format or the
wrong data type.
0xE4 228 ERROR_PARAMETER_NOT_
SUPPORTED
A parameter is not supported by this reader.
0xE5 229 ERROR_WRONG_MESSAGE_
FORMAT
The XML format is incorrect. An error was
detected when parsing the command.
0xE6 230 ERROR_INVENTORY_COMMAND_
FAILED
The inventory command failed.
0xE7 231 ERROR_READ_COMMAND_
FAILED
The read command failed.
0xE8 232 ERROR_WRITE_COMMAND_
FAILED
The write command failed.
0xE9 233 ERROR_WRITETAGID_COMMAND_
FAILED
Writing the EPC-ID failed.
0xEA 234 ERROR_LOCK_COMMAND_
FAILED
The Lock command failed.
0xEB 235 ERROR_KILL_COMMAND_
FAILED
The Kill command failed.
0xFA7 4007 ERROR_READPOINT_NOT_FOUND The specified read point is inactive because
it was not assigned to any antenna.

Siemens SIMATIC RF650R Specifications

General

Brand	Siemens
Model	SIMATIC RF650R
Category	Other
Language	English