Programming via XML interface
10.4 XML EventReports
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
275
value_utcTime Text -- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Message text of the alarm
Value_eventType Text Coming
Going
Status display
Some alarms have a simple status
indication. This indicates whether the
error occurred and is still present or
whether it has been eliminated.
value_paramXY Text -- Additional parameter
The name of the parameter depends
on the error. Depending on the error
number, an alarm contains a different
List of possible alarm messages
0x1511 5393 ERROR_NO_ANSWER_FROM_TAG
The transponder is not responding.
0x1512 5394 ERROR_WRONG_PASSWORD
The password you entered is incorrect. Access to the transponder was denied.
0x1513 5395 ERROR_VERIFY_TAG_FAILED
Verification of the transponder failed.
0x1514 5396 ERROR_TAG_UNSPECIFIED
General transponder error.
0x1515 5397 ERROR_TAG_INSUFFICIENT_POWER
There is not enough transponder power.
0x1521 5409 ERROR_NO_TAG
There is no transponder in the antenna field.
0x1522 5410 ERROR_NO_DATA
The requested data is not available.
0x1523 5411 ERROR_INVALID_CRC
0x1525 5413 ERROR_NO_FREQUENCY
No radio channel activated.
0x1526 5414 ERROR_NO_CARRIER
No carrier signal activated.
0x1527 5415 ERROR_MORE_THAN_ONE_TAG_IN_FIELD
There is more than one transponder in the antenna field.
0x1528 5416 ERROR_AIR_PROTOCOL_UNSPECIFIED
General radio protocol error
To Next Page
Loading...
Need help?
General