5.2 RESET button
Layout
The RESET button is located behind the blanking cover on the SIMOTION D4x5‑2.
Performing a reset
A reset causes the entire system to be reset and forces the system to power up again. This
operation is comparable with a "Power on Reset" but does not require the disconnection of
the 24 V power supply (e.g. in order to exit the F state).
Commissioning (hardware)
5.2 RESET button
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B 101
To Next Page
Loading...
