Connecting
4
4.1 General Overview
Overview
The
SIMOTION D4x5‑2 has a number of interfaces that can be used for connecting the power
supply and for communication with the other components of the system. To make these
connections, the front cover of the SIMOTION D4x5‑2 must be opened.
● The different SINAMICS components are interconnected via DRIVE‑CLiQ.
● Actuators and sensors can be connected to the digital inputs/outputs.
● For communication purposes, the SIMOTION D4x5‑2 can be connected to PROFIBUS DP,
PROFINET IO with IRT/RT, MPI and Ethernet.
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B 55
To Next Page
Loading...
