Commissioning
4.3 Creating a STEP 7 project
Connecting SIMOVERT MASTERDRIVES MC to the Technology-CPU
18 Product Information, 03/2008, A5E00272072-05
● If you acknowledge the settings with OK, the configured objects are added to the
SIMATIC 300 station.
Figure 4-5 SIMATIC 300 station
Note
The X1-MPI/DP interface in the subrack is not networked for this example. It is set as
default to a communications for MPI with 187.5 Mbaud. In order to download the
technology system data onto the module, the data transfer rate of the interface should be
set to ≥ 1.5 Mbaud.
To Next Page
Loading...
