Siemens SIMOVERT MASTERDRIVES MC Series - Dialog Box for Setting P171; Dialog Box for Setting P183.I001

Commissioning
4.5 Connect MASTERDRIVES MC to the Technology-CPU
Connecting SIMOVERT MASTERDRIVES MC to the Technology-CPU
Product Information, 03/2008, A5E00272072-05
83
● Set the required value in the dialog box for the application-dependent parameter P171
(position resolution):
Figure 4-59 Dialog box for setting P171
● Carefully read the contents of the message box with the setting information for the
application-dependent parameter P183.i001 (position sensing configuration) and
acknowledge the message.
Figure 4-60 Message box with setting information for P183.i001
● Set the required value in the dialog box for the application-dependent parameter
P183.i001 (position measurement configuration):
Figure 4-61 Dialog box for setting P183.i001