Commissioning
4.5 Connect MASTERDRIVES MC to the Technology-CPU
Connecting SIMOVERT MASTERDRIVES MC to the Technology-CPU
Product Information, 03/2008, A5E00272072-05
79
● Set the required value in the dialog box for the application-dependent parameter P340
(pulse frequency):
Figure 4-51 Dialog box for setting P340
● Carefully read the contents of the message box with the setting information for the
application-dependent parameter U922.i001 (actual position value of the encoder
interface) and acknowledge this message.
Figure 4-52 Message box with setting information for U922.i001
To Next Page
Loading...
